Fjernstyrede RC biler

BSC-40A+HS Watt-out-put limit: The output is rated at 388 watt. Under this watt, the speed control will work normally. When the watt approximately reaches to 410~420, it will automatically shutdown to prevent the over load to the speed control. Temperature protection: When the temperature reaches to 95 degree C, the speed control will slowdown and the output will reduce 50% (the on board LED will turn on). You have to move the throttle stick to idle position and then the speed control will re-work once you throttle up again. Feature: Smooth forward operation Extremely low resistance 32KHz Frequency operation P.O.R Power on reset Easy user programmable features. Audible arming signal microprocessor controlled B.E.C: 5.0V / 3.0A Programmable low volt cut off for Li-Po Safe start protection micro size allows for ease of installation Programmable motor rotation Item Size 61x21x13 mm Item Weight 30.5 g Max Continuous Current 40 Amps Operating Voltage Range 6 to 15V On Resistance 2.56 mOHM Max BEC Output 3 Amps@5.0 V 2S~4S Lithium, 6~12 Cell Ni, with heat sink Warning: DO NOT install a motor which rating is larger than the speed control’s limit to avoid damage or burn down.